SET UP A WANSVIEW W3 ON IP CAM PRO 1080P
SET UP A WANSVIEW W3 ON IP CAM PRO INSTALL
SET UP A WANSVIEW W3 ON IP CAM PRO MANUAL
SET UP A WANSVIEW W3 ON IP CAM PRO SOFTWARE

If you had already connected the camera with your wireless router, then skip this step. These steps in the Camera Configuration screen to make sure everything is configured correctly). With CameraFTP's service, most regular setup steps are not required. Click Network and then click the FTP tab, you can enter the FTP information as shown in the screenshot below.

SET UP A WANSVIEW W3 ON IP CAM PRO INSTALL

(It is recommendedĪfter you log on to the camera, please install the Plug-in:Ĭlick 'View Video Mode 1', it will display the live view screen:Ĭlick Setup, you will see the Setup Main screen. The default username is admin, and password is 123456. So please download Firefox web browser if you don't have it already. Most IP cameras don't support Chrome, incl. Step 2: Configure the Camera Using the Web-based You can use VSS as a cloud-enabled NVR, which requires a PC. Note: This camera is compatible with VSS-based Cloud Recording.

( After you find the camera's IP address, you can stop VSS.

SET UP A WANSVIEW W3 ON IP CAM PRO SOFTWARE

If your computerĭoes not have a DVD/CD drive, then you can download CameraFTP VSS software to find the camera's IP address. Usually you will run the included IP Camera Search Tool to find the camera.

SET UP A WANSVIEW W3 ON IP CAM PRO MANUAL

Please refer to the manufacturer’s manual for more detailed information. If you unplug the Ethernet cable, Wi-Fi will be re-enabled and keep the Wi-Fi when you connect a network cable and it will keep the same IP address Wansview NCM625GA Cameras can automatically disconnect In about 1 minute, you will see the status light changes, indicating it is connected Seconds the WPS button will usually start flashing. You can also use manufacturer's mobile app to connect it to the network.Īccess point/router supports WPS, then it is very easy to connect your deviceĬamera and press the WPS button on your Wi-Fi access point (router) for 3 Router does not support WPS, then you can connect the camera with the Please read the product manual for detailed instructions. Otherwise, there are several ways to connect the IPĬamera to your Wi-Fi network. If you want to use wired connection, you just need to connect the Ethernet cable. To the network and find IP address 1.1 Connect camera to the network If you have finished these basic steps before, Manufacturer for all camera-related issues and contact us only forĬameraFTP-related (cloud service / FTP) issues. It may not be accurate or completely up-to-date.

SET UP A WANSVIEW W3 ON IP CAM PRO 1080P

The information provided isīased on our knowledge of the model Wansview NCM625GA Pro HD 1080P Pan/Tilt WiFi Camera. Replace the product manual from the manufacturer. Supported for video recording when the motion sensitivity is set to 100.ĩ/10 (strongly recommended for 1080P video/audio monitoring) Supported for both image and video clip based recording

10 IR LEDs for Night Vision Up to 26 feet distance for 24-hour surveillanceīasic camera information Video / image resolution.

Motion/Audio detection with cloud video recording.

Two-Way Voice, built in mic and speaker.

Remote Pan and Tilt control, 340 degree x 90 degree covers every corner of your home.

Easy WiFi Configuration via mobile app or WPS.

Supports both wired and wireless connection.

Superb HD 1080P Video with 1920x1080p at 25 fps.

Wansview NCM625GA Pro HD 1080P Pan/Tilt WiFi IP Camera is packed with many high-end features for a pretty low price. Configure Video Profile and Image/Video Recording OptionsĤ.1 Configure Video / Image Settings (Resolution, Frame Rate, Bit Rate) Step 2: Configure the Camera Using the Web-based Configuration Tool Step 1: Connect camera to the network and find IP address Configure Wansview NCM625GA Pro HD 1080P Pan/Tilt WiFi IPĬamera for Cloud Recording, Remote Monitoring and Playback

Set up a wansview w3 on ip cam pro