#Burnin board .exe
#Burnin board install
#Burnin board serial

Performs a burn in the Python interpreter environmentĪutoFlash.py Consistent with the Linux Shell, you can see this in the Py codeĪutoErase.py To erase the firmware of the current hardware. If there is no path, the default is the same directory.

`firmware.bin`,Refers to the location of a file that is burned.

`-baud 921600`,If a burn error occurs, it can be lowered to 460800, which will slow down the burn.

#Burnin board serial

`-port COM3` COM3 is the name of a serial port in Windows and /dev/ttyusb0 in Linux.esptool.py is ESP chip series of burn script tools.

#Burnin board install

Before this need users to install python and installing the dependencies esptool, such as ` PIP install esptool `.

Sudo esptool.py -chip esp32 -port COM3 -baud 1152000 write_flash -z -flash_mode dio -flash_freq 40m 0x1000 firmware.bin

#Burnin board .exe

Exe - port COM4 - baud 115200 - port ` usage, specific can see below the configuration parameters are introduced. More than two tools support command line ` AutoErase. The above procedure through related Python scripts and ` Pyinstller X86 ` module packaging

Exe ` program firmware can be erased, if there are other firmware, or have a unsolvable problems, are available through the repair (erase) tool to reset the board after burning firmware, note that it will be the board all the file is deleted. Bin ` file burn write to the chip of a key. Exe ` program will automatically find the latest inserted into the serial port and will be the same directory ` fimware. Now that the burn is complete, you can move on to the next chapter 3 Hello, World!，If you have any other questions or want to know more, please read on. The above is a successful burn, if the failure, please try again, still failed, please check or device serial port It will recognize the most recently inserted serial port of the board and automatically write all firmware files in the same directory to the board. In Windows, for example, double-click to run autoflash.exe. It is recommended to update the board once in the following situations. The above is the successful erasure, if failed, please try again, still failed, please check or the serial port of the device.

In Windows system, for example, double-click to run autoeraser.Exe, which recognizes the serial port where the computer inserted the latest board and automatically erases the board, so you only need to make sure the board is the latest device to insert.

It is recommended to erase the board once in the following situations. One key to write firmware Erase the board firmware On other systems, you need to use the py script for the burn, which is autoerers.py and autoflash.py.įinally, please ensure that the driver has been successfully installed and the board has been connected to the computer, you can continue to read the following content Now it's just an idiom.As long as we burn the tools, we can put the program we want to run in the hardware.įor example with windows 10，you need choose a image verison from BPI:bitrelease，and download AutoErase.exe、AutoFlash.exe、firmware.bin and put it in the same directory 7.1 Write firmware failed, write program flash back, or the result appears red warningīurn is a term that used to be used to download programs to hardware.4.3 Performs a burn in the Python interpreter environment.